Block Board Plywood

Block board plywood is made up of a core of softwood strips. These strips may be up to about 25 mm wide. The strips are placed edge to edge and sandwiched between veneers of hardwood. The sandwich is then glued under high pressure.

In terms of construction, there are three main types of block board , i.e. 3-ply, 5-ply and 7-ply. A 3-ply block board consists of a core sandwiched between two layers of veneers whereas a 5-ply and 7-ply block boards are made of a core and covered with 2 layers and six layers of veneers on each side respectively.

Our Blockboards are using for producing doors, tables, shelves, paneling and partition walls. It is normally used for interior usages, due to the type of glues used. Blockboard has very good screw holding and can be considered as solid wood; it has a good resistance to warping.


Face: Keruing 100% Hard Wood
Core: 100% Eco Friendly, High Density – Hardwood
Strips: Semi hardwood
Density: 600kg/m3 – 700kg/m3


30mm, 24mm, 19mm


8.0 x 4.0 feet 2440 x 1220mm
7.0 x 4.0 feet 2140 x 1220mm
6.0 x 4.0 feet 1840 x 1220mm
8.0 x 3.0 feet 2440 x 0920mm
7.0 x 3.0 feet 2140 x 0920mm
6.0 x 3.0 feet 1840 x 0920mm